Hydraulic Cylinder Single Acting Telescopic Multi Stage 5 Stage 6
Inch Bore Size
Application: dump trailers, aerial trucks, lift tables and the list goes on...
| Type | Stroke (mm) | Installation center distance (mm) | Bore size (mm) | Stage | Capacity
(ton) | Pressure
(Bar) |
|
| 5TG-E150X850QZ | 850 | 150 | 150 | 5 | 28.26 | 160 |
| 5TG-E130X800QZ | 800 | 125 | 130 | 5 | 21.23 | 160 |
| 5TG-E130X800QZ | 800 | 115 | 130 | 5 | 21.23 | 160 |
| 5TG-E140X800QZ | 800 | 115 | 140 | 5 | 24.62 | 160 |
| 5TG-E140X1000QZ | 1000 | 125 | 140 | 5 | 24.62 | 160 |
Features:
Every DALLAST single acting telescopic cylinder is individually
tested before leaving our plant to assure proper performance and
leak-free operation. All cylinder products carry an 12 months
warranty. Snap on glass filled bearings that absorb contaminants without
damaging cylinder walls. Nylon tipped set screws that conform to packing nut threads to
decrease the probability of packing nuts backing off.
Single-acting cylinders transfer force and motion in one direction
only. Acts on the piston to push the piston rod out.
When manufacturing multistage cylinders, the number of stages are
able to produce, which is limited only by the physical confines of
the cylinder requirement.
Piston rod:
All our piston rods are hard protection coated, such as hard chrome
plate, or if required, can be coated with an alternative treatment
more suitable to the application.
High strength damage resistant piston rod provides 100,000 PSI
minimum yield material in 1" through 4 1/2" diameters.
Warranty:
We offer 12 months warranty.
From the date of delivery within 12 months, our company is
responsible for the replacement, repair or return. The user is a
hydraulic cylinder propulsion, to improve the inherent quality of
the fuel tank is the purpose of our factory production and the
pursuit of goals.
The most common problems when selecting a hydraulic cylinder are as
follows:
A. Retract dimension (Center of pin to center of pin)
B. Stroke length (Inches)
C. Mounting types
D. Port Size and Type (SAE or NPT)
E. Pressure rating (PSI)
F. Bore Diameter (Inches)
G. Application details
After-sales service:
1. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
instruction etc
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.
